HSM V-Press vertical baling presses

The HSM V-Press compact advantages:

HSM baling presses can reduce the volume of your waste by up to 95%! That means you can save valuable space which would otherwise be taken up at your site, plus, you will benefit from the generation of a secondary and valuable raw material – baled recyclable waste! Heavier bales are more valuable and are likely to return a financial benefit back to your business when collected by Waste Management companies or Recyclers - either as a reduced cost of disposal or at best as an income stream.


Attractive cost/performance ratio

The HSM V-Press series combines the outstanding quality standards of HSM environmental technology with a high level of profitability. Due to both their performance and durability. they are the economic waste management solution par excellence: The HSM V-Press reduces costs of the most underestimated cost centre: waste disposal


Energy efficient and quiet

With the rapid motion technology developed specifically for the V-press series. the power consumption and drive power are significantly reduced and at the same time the through put rate increases. The cycle time is reduced with this technology by up to 40% compared to conventional drives. Due to special pump technology. the machines are particularly quiet.


Easy-to-use

The entire pressing cycle, beginning with closing the door, is fully automatic. A text display informs you in detail about the respective status of the process. When the pressing procedure comes to an end, the sliding door opens automatically. Extracting the bale is simple and easy, and it can be comfortably transported on a pallet.


High operational flexibility

With the HSM V-Press you can decide whether you prefer to press cardboard or plastic film at the touch of a button.


Extremely high level of process reliability

Thanks to the newly developed HSM TCS (TorsionControlSystem), the angle of the press ram is minitored continuously in every direction avoiding one sided overcharge. Optimising the pressing procedure and assures longer service life.


The available V-Press doors

Double door

Double door

  • To fill the press, the upper half of the doors is swung to the right
  • Self-latching closing technology
  • Automatic start of the pressing process after closing the door

Loading flap

Loading flap

  • To fill the press, the upper half of the doors is folded down
  • The filling flap can then be used as storage and therefore facilitates filling
  • Particularly suitable for filling with small-sized material
  • Automatic start of the pressing process after closing the door

Sliding door

Sliding door

  • To fill the press, the upper half of the doors is pushed down
  • Automatically opens after the compression process
  • Opened upper edge of the gate can be used as storage and therefore facilitates the filling
  • Automatic start of the pressing process after closing the door
  • Easily operated

The door lock

Bell-crank lever

  • Quick and safe opening of the door
  • Suitable for machines with up to 40 kN of pressing power

Hand wheel door lock

  • Counter-rotating thread for quick opening and closing
  • Mounted at an ergonomic height
  • Easy to handle
  • Opening aid for expansive materials

Hydraulic door lock

  • Convenient opening and closing via two-hand operation
  • Particularly suitable for rapidly expanding material
  • No manual effort required

HSM V-Press 610

The HSM V-Press 605 and HSM V-Press 610 reduce the volume of cardboard or foils in an economical way.

HSM V-Press 820

Thanks to its powerful motor, its ergonomic design and its sophisticated and innovative technology. The HSM V-Press 820 combines all of the advantages of a baling press into one machine.

HSM V-Press 825

The HSM V-Press 825 is characterized by its very low transport height.

HSM V-Press 860

With a pressing power of 548 kN and employing low-noise and energy-saving technology. the HSM V-Press 860 is the most economical and ecological solution for your waste disposal.

HSM V-Press 860 plus B

With a pressing power of 594 kN and low-noise and energy-saving technology, the HSM V-Press 860 plus B is the most economical and ecological solution for your waste disposal.

HSM V-Press 1160

With a maximum bale weight of 550 kg. strong pressing power and an absolutely high efficiency level. the HSM V-Press 1160 is the top-model of the HSM V-Press series.